RVN-WQ8-LORA
Pool LoRa • 8-in-1
Floating probe → LoRa → Display → 2.4 GHz WiFi → Tuya app
Read the model guide → Open the matching guide →Support center / model-specific guidance
A clear next step for your exact device.
Find model-specific online instructions, calibration videos and practical troubleshooting help.
Select your device / model-specific support
Same brand. Different instructions.
RVN-WQ7-RS485 / M485
Aquarium RS485 • 7-in-1
Matching probe → Wired RS485 → Display → 2.4 GHz WiFi → Tuya app
Read the model guide → Open the matching guide →
RVN-WQ7-WIFI / 10.0 Series
Wireless water • 7-in-1
Remote water sensor → Long-range wireless → Display → 2.4 GHz WiFi → Tuya app
Read the model guide → Open the matching guide →
RVN-HYDRO-6IN1 / HY485
HY485 • Air + nutrient water
Air + nutrient-water sensing → HY485 display → 2.4 GHz WiFi → Tuya app
Read the model guide → Open the matching guide →
Standalone RS485 probe
RS485 digital probe
Probe → RS485 A/B → Compatible host
DC 5–24 V power. No display, WiFi, app or gateway included. Confirm protocol, address, registers and scaling; Modbus compatibility is not established.
Confirm compatibility Read the model guide →
RVN-7IN1-PROBE
Aquarium monitoring probe
Probe + integral cable → Confirmed connector → Compatible Rovynel host
Display, controller and floating ring not included. Confirm the exact Rovynel model and connector before ordering.
Confirm compatibility Read the model guide →
RVN-WQ8-LORA-PROBE
Pool LoRa replacement floating probe
Floating probe (included) → LoRa → Compatible existing display (not included) → 2.4 GHz WiFi via display → Tuya app via display
Replacement probe only. Must be used with a compatible Rovynel 8-in-1 LoRa Pool Monitor display; cannot operate as a standalone monitor. Display not included. Confirm hardware revision and replacement pairing before ordering.
Confirm compatibility Read the model guide → Open the matching guide →
TH-WIFI
Air temperature & humidity
Remote wired SHT40 → Full-color LCD → 2.4 GHz WiFi → Tuya / Smart Life
Read the model guide →A careful routine
Set up. Calibrate. Reference check.
01 / Set up
Identify your exact model. Check placement, sensor-side connection and the 2.4 GHz WiFi app link where supported.
02 / Calibrate
Follow the procedure and materials for your exact model. Do not apply another model’s sequence.
03 / Reference check
Compare with suitable independent tests, then clean and maintain the sensor according to its guide.
Online manuals · Quick starts
Keep the instructions close.
Pool LoRa • 8-in-1
RVN-WQ8-LORA / Online guide
Aquarium RS485 • 7-in-1
RVN-WQ7-RS485 / M485 / Online guide
Wireless water • 7-in-1
RVN-WQ7-WIFI / 10.0 Series / Online guide
HY485 • Air + nutrient water
RVN-HYDRO-6IN1 / HY485 / Online guide
RS485 digital probe
Standalone RS485 probe / Online guide
Air temperature & humidity
TH-WIFI / Online guide
Practical troubleshooting
Check the path before guessing the cause.
App connection
Check that the display is joining a 2.4 GHz WiFi network. Follow the pairing guide for the exact model and app.
Sensor → display link
Identify whether your system uses LoRa, matching wired RS485 or another wireless link. Check the matching sensor and model instructions.
Unexpected water readings
Check placement, units, temperature reference and calibration history. Compare with suitable independent tests.
RS485 integration
Confirm DC 5–24 V power, A/B wiring, protocol, address, registers and scaling. Do not assume Modbus.
Still need help?