Rovynel Device Compatibility Matrix

Use this matrix to match the device type, parameters, and connection path to your monitoring job. Product names that sound similar do not necessarily measure the same parameters or connect in the same way.

Six-device compatibility matrix

Product Device type Measures Connection Best fit Important limits
8-in-1 LoRa Pool Monitor Complete monitor pH, free chlorine, ORP, salinity, TDS, EC, specific gravity, water temperature LoRa probe-to-display; display uses 2.4 GHz WiFi with Tuya Pools and spas needing free-chlorine visibility Not a dissolved-oxygen meter; not a standalone RS485 probe
7-in-1 WiFi RS485 Aquarium Monitor Complete monitor pH, ORP, TDS, EC, salinity, specific gravity, water temperature Wired RS485 probe-to-display; display uses 2.4 GHz WiFi with Tuya Aquariums, reefs and fixed installations Does not measure free chlorine or dissolved oxygen
7-in-1 WiFi Water Monitor Complete monitor pH, ORP, TDS, EC, salinity, specific gravity, water temperature Long-range sensor-to-display; display uses 2.4 GHz WiFi with Tuya Remote water monitoring where a cable run is inconvenient Does not measure free chlorine or dissolved oxygen
Standalone RS485 Water-Quality Probe Integration component Water temperature, pH, EC, TDS, ORP, salinity (ppt and %), specific gravity DC 5–24 V; RS485 A/B to a compatible controller PLC, controller and custom automation projects No display, app or gateway included; no free-chlorine channel
HY485 Hydroponic Monitor Complete air-and-water monitor Air temperature, air humidity, pH, water temperature, EC, TDS 2.4 GHz WiFi with Tuya Hydroponic systems needing air and nutrient-solution trends together Does not measure ORP, salinity, specific gravity, free chlorine or dissolved oxygen
WiFi Air Temperature & Humidity Monitor Environmental monitor Air temperature and relative humidity Remote SHT40 probe; 2.4 GHz WiFi with Tuya/Smart Life Rooms, grow areas, equipment spaces and enclosures Does not measure water temperature or water chemistry

Choose in three steps

  1. Decide whether you need a complete monitor, a controller-ready RS485 probe, or an air sensor.
  2. Confirm every required parameter in the “Measures” column. A calculated value is not a direct chemical analysis.
  3. Confirm the full connection path, including probe-to-display wiring or radio and the 2.4 GHz WiFi requirement for app-connected models.

View the side-by-side comparison or open product support before ordering.

Compatibility matrix reviewed August 1, 2026. It reflects the six current Rovynel product listings and does not certify third-party controller compatibility.