Pool Monitor Setup Video

Rovynel Pool Monitor Guide

Pool Monitor Setup Video

Watch the three clips in order. The first video helps you prepare the monitor, the second walks through connection and placement, and the third shows the final monitoring check before regular use.

1. PrepareCheck the device and probe area before setup.
2. ConnectFollow the app flow and place the monitor steadily.
3. ConfirmReview the first readings before daily monitoring.

Video 01

Prepare the pool monitor

Start here before placing the monitor in the water. This section is for checking the device condition, confirming the probe area is clean, and making sure the monitor is ready for setup.

  • Inspect the probe area before first use.
  • Keep the monitor close to the phone during setup.
  • Use this step to avoid simple placement or preparation mistakes.

Video 02

Connect and place the monitor

After the monitor is ready, follow the connection flow and place it where it can float steadily. A stable setup helps the app receive consistent water quality readings.

  • Follow the app connection steps in order.
  • Keep the device in a stable pool area.
  • Wait for the status to update before relying on readings.

Video 03

Confirm the first monitoring check

Use the final clip as a quick confirmation pass. Once the monitor is connected and positioned, check that readings appear normally and that the probe remains clean for daily monitoring.

  • Review the first app reading after setup.
  • Check that the monitor stays positioned correctly.
  • Clean and store the probe according to regular care guidance.

Final setup checklist

Device prepared, app connected, monitor placed steadily, first reading reviewed, and probe area checked.

Need help?

For setup questions, contact support@rovynel.com with your order number and a short description of the issue.